Effect of materials on metal shredder Metal shredders are widely used, and their output is also affected by materials.1. Humidity of material: If the material is too moist, when the equipment is working, the material is easy to adhere to the blade on the inside of the metal shredder, which increases the resistance of the machine. If the inside of the machine is stuck with scrap, it is prone to blockage during the unloading process, which seriously affects the shredder performance of the metal shredder.2. The composition of the material: During the working process of the metal shredder, the fine break is easy to adhere inside, which increases the difficulty of crushing.Therefore, the more the fine break, the greater the impact on the shredder. That means that the more fine the material contained in the material before breaking, the more the crusher is broken. It is recommended that the metal shredder be sieved before breaking.3. Hardness of the material: The harder the material, the harder it is to shred the metal shredder and the slower the speed.Even a shredder with a sharp blade is not an exception. And the greater the hardness of the material, the greater the wear on the blades and other accessories, and the shredder also increases the difficulty of shredding.