MENU+8618638663826 Email:[email protected]Industrial shredder manufacturer and solid waste disposal solution provider

Instructions for use and maintenance of large metal crusher

Brief introduction of large metal crusher:Various metal materials are fed into the machine cavity of the metal crusher by the feed conveyor. In the crushing process, the metal material rotates with the hammer head to make the crushed metal material rotate with the hammer head. After a short period of time, the pellets are beaten and the finished particles flow out from the bottom screen. When the material flows out, part of the paint is removed through the dust collector. Blow away impurities and make the metal particles flowing out clean. Convenient transportation, and increase the speed of scrap iron cast iron, large-scale metal crusher has made outstanding contributions to the national waste reuse and increase value.    Application fields of large metal crusher:Large metal shredders are mainly used in waste resource recycling companies, scrap metal recycling industries, large-scale waste recycling stations and steel mills. Applicable materials for large metal crusher:Large metal shredders can scrap used bicycles, motorcycles, automobiles, cans, paint buckets, scrap steel scrap iron scrap, scrap briquettes, color steel tiles, scrap aluminum, aluminum skins, scrap iron boxes, aluminum-iron cans, iron pins, steel slag Various metal materials such as iron slag, scrap, light and thin materials. And the refrigerator and washing machine are broken into ideal particles. Instructions for use and maintenance of large metal crusher:<1>The hammers are installed incorrectly in the maintenance of the metal crusher assembly. In order to prevent the weight of the rotor from losing balance when the hammers are turned around, all the hammers in the metal crusher must be turned and turned around together, otherwise strong vibrations will occur during operation.<2> Periodic inspection and maintenance of the equipment, pay attention to check that all parts are tightened and loose, and at the same time, pay attention to check the wear of wearing parts. If the wear is serious, it should be replaced in time to avoid damage to the main components and take necessary fire prevention measures .<3> The material should be kept evenly during production to ensure the crushing quality and normal production. At the same time, the overload of the motor is strictly prohibited to ensure normal operation of the machine. Due to the high speed, in addition to the correct and firm installation, at the same time, it should maintain good lubrication to maintain the normal operation of the machine. Under normal circumstances, bearing temperature does not exceed 70 degrees is normal.<4> Feeding at a constant speed, the card machine should be stopped immediately, and the obstacle should be cleared after cutting off the power;<5> After the gaps between the various parts of the equipment are adjusted, the interior of the equipment is strictly and privately modified;<6> The blade should be replaced in time when the output is reduced due to excessive blade wear;<7>Notify the manufacturer in time for unfinished matters.