MENU+8618638663826 Email:[email protected]Industrial shredder manufacturer and solid waste disposal solution provider

YX-600 single-axis shredder machine

1. Product FeaturesSingle shaft shredder machine is a new type of crusher developed by our company. The machine adopts a close-moving blade structure and is equipped with a hydraulically driven push-feeding force feeding machine, which has the characteristics of strong crushing capacity and high efficiency. The main electrical uses Delixi or Siemens to ensure the safe operation of the system.2.Use and performance of equipmentThis machine is mainly used for the crushing and recycling of various thick-walled waste materials and scraps in the plastics industry.The machine adopts a close-packed small blade knife-roller structure, and is provided with a mechanism such as a pusher plate for forced feeding. It has the characteristics of stable crushing performance, high efficiency, low temperature rise, and convenient operation. It is protected by multiple switches, safe and reliable.3.Technical parametersNumber of moving knives: 24Rotation diameter (mm): φ280Feed opening size (mm): 630 * 650shredder machinePower (KW): 22kwWeight (kg): 18004,shredder machine operating instructionsv Operation: After the power indication is normal, press the power supply start, the oil pump start, and finally press the host start button, the feed is broken; the machine can realize the host load analysis and processing according to the program to ensure the host's safe and smooth operation;v Shut down: After the production is completed, please confirm the blanking, press the stop button to stop, stop the oil pump operation, and open the air circuit breaker.6. Reasonable use and maintenance of equipment1) The shredder machine must be reliably grounded, and the installation must be stable to ensure sufficient operating space. Before starting the machine, check whether the bolts are loose, check the use of the tool, and check whether there are debris in the case. Normal, it is strictly forbidden to start without phase; it is forbidden to put metal materials and parts into the material inlet; the blade edge must always be sharp.2) The start-up procedure of this machine is: turn on the power-start the power-start the main engine oil pump-start the main engine-push the box operation-feed (after confirming that everything is normal)The shutdown procedure of the Shredder machine is: stop feeding, after the remaining material in the standby is broken (can be judged by the sound of the broken material)-the host stops (while the pushing box stops)-the oil pump stops-cut off the power3) The pusher box has two working states to choose from. After the feed, oil pump and host are started, the pusher box can automatically go back and forth. The advance and retreat time of the pusher box can be adjusted appropriately according to the broken material. After starting, press "Forward" and "Back" to manually control forward and backward.4) Due to the high crushing efficiency of the shredder machine , during the operation, the debris in the receiving hopper should be frequently observed. If the main machine is stuck, the feeding should be stopped immediately, and the pushing box is pushed slightly in the "manual" state , Reverse the host, and continue working after normal.